4
VFD-B Series
DELTA ELECTRONICS, INC. ALL RIGHTS RESERVED
4-3
Display Message Descriptions
Display the output current present at terminals U/T1, V/T2, and
W/T3.
Display the AC drive forward run status.
The AC drive reverse run status.
The counter value (C).
Display the specified parameter setting.
Display the actual value stored within the specified parameter.
External Fault.
Display “End” for approximately 1 second if input has been
accepted. After a parameter value has been set, the new
value is automatically stored in memory. To modify an entry,
use the
or keys.
Display “Err”, if the input is invalid.
To Next Page
Loading...