Delta Vivotek IB9391-EHTV-v2 - Page 452

VIVOTEK
452 - User's Manual
© 2022 VIVOTEK INC. All Right Reserved
303
Pragma:no‐cache\r\n
\r\n
supportdevice=washer,heater\r\n
washer_status=off\r\n

PARAMETER VALUE DESCRIPTION
channel 0~"capability_nvideoin"‐1 Ch a nn e l ofthevideosource.
supportdevice N/A Getsupportperipheraldevice.
washer_supportmode N/A Getthesupportmodeofwashercontrolsystem.
washer_mode N/A

Getthecurrentmodeofwashercontrolsystem.
Itreturnthevalueof"washer_mode"
washer _status N/A Getthecurrentstatusofwashercontrolmodule.
Thestatusis'off'asdefault,whichmeansthe
washerisstopped;andthestat us'on'meansthe
washerisrunning.
washer_dwelltime N/A Getthecurrentwashercleanperiodofwasher
controlsystem.
heater_supportstatus N/A Getthesupportstatusofheatercontrolsyste m.
heater_status N/A

Getthecurrentheaterstatus.
Normallyitwillbe'auto',itmeanstheheater
deviceiscontrolbyinternalalgorithmtokeepin
asuitableenvironment;Otherwiseis'trigger',it
meanstheheaterdeviceisforceenabletoheat
toaninternalcondition.‘trigger’ status willbe
transferto‘auto’afterrea chtheinternal
condition.

