24
/ USER'S GUIDE
19. Current time Change
Press button (I+II) for 2 seconds
and then current time flashes.
Press button I for 0.5 second to
increase “hour” and press it
continually to increase “hour”
continually.
Press button II for 0.5 second to increase “minute” and
press to cancel the setting, press button IV for 0.5 second.
If you press button (I+II) for 2 seconds again after setting
the current time, the display of current time does not flash
to inform you that setting is complete.
In case that you do not press any button for 10 seconds, it
automatically displays the current time.
20. Adjusting the sensitivity of shock sensor
Please ask your installer for the location of your shock
sensor. You can adjust the sensitivity of the shock sensor by
turning the knob on the shock sensor. Turn the knob on
the shock sensor clockwise for higher sensitivity and
counter clockwise for lower sensitivity.
To Next Page
Loading...
