To Next PageTo Next Page
Need help?Do you have a question about the Deltran Battery Tender Junior and is the answer not in the manual?
General| Output Voltage | 12V DC |
|---|---|
| Output Current | 0.75A |
| Battery Compatibility | 12V Lead Acid, AGM, Gel, Flooded |
| Charge Stages | 4 |
| Safety Features | Reverse Polarity Protection, Spark Proof |
| Input Voltage | 120 VAC @ 60 Hz |
Specifies the input voltage and frequency requirements for the charger.
Details the nominal voltage and current output of the charger.
Indicates the typical maximum operating temperature for the charger.
Provides the physical size measurements of the charger unit.
Lists the shipping weight of the charger including accessories.
States compliance with safety standards like UL-1236 and CSA 22.2.
Confirms the product is UL Listed under a specific file number.
Lists Deltran part numbers and corresponding charger descriptions.
Verifies battery voltage and electrical continuity before charging begins.
Charges the battery at full current until it reaches 75-80% capacity.
Maintains constant voltage to condition battery for optimal performance.
Maintains battery at full charge with minimal current.
Indicates AC power and charger function, or charging in progress.
Indicates battery is over 80% charged or fully charged (storage mode).
Signals reverse polarity, sulfated battery, or poor connection.
Emphasizes operating the charger in a well-ventilated area.
Guides on checking AC power and battery connections.
Describes the DC output cord, plug, and common accessories.
Details available extension cables and their specifications.
Explains polarity rules for connecting DC cable assemblies safely.
Warns against connecting DC cable assemblies together.
Highlights risks associated with connecting opposite polarities.
Discusses Deltran's commitment to customer satisfaction and innovation.
Details efforts in process improvement and leveraging new technologies.
Explains the provision of updated product information.
Defines the meaning of WARNING and CAUTION labels.
Covers precautions related to battery materials and damaged cords.
Warns about sparks and open flames near batteries or engines.
Advises against disassembling or internally repairing the charger.
Provides guidance on selecting and using extension cords.
Details safety measures when working near lead-acid batteries.
Warns about sparks from tools and removing metal jewelry.
Instructs to make all connections before plugging into AC outlet.
Guides on positioning cords and checking battery polarity.
Explains the automatic nature and status monitoring of the charger.
Highlights features like sparkproof, short circuit, and reverse polarity protection.
Estimates charging time based on battery capacity and charger rate.
Details behavior and considerations for very low voltage batteries.
Troubleshooting step for when no indicator lights are active.
Indicates AC power is present but battery is not connected or voltage is low.
Signifies the charger is actively charging the battery.
Indicates battery is over 80% charged; red light may also be steady.
Confirms the battery is fully charged and in storage mode.
Suggests potential issues like sulfation or poor electrical connection.
Checks AC power, connections, and fuse for the 'no lights' symptom.
Addresses intermittent connections, defective battery, or pre-charged battery.
Considers battery size, external loads, or battery defect.
Investigates external loads or intermittent connections causing voltage drop.
Summarizes AC input current and DC output voltage/current.
Provides operating temperature limits and charger case dimensions.
Details product declarations, conformity, and design conformance.
Addresses issues when no indicator lights are active.
Analyzes why the green light appears too early in the cycle.
Troubleshoots why the charger does not switch to storage mode.
Addresses the red light remaining on for an extended period.
Provides steps and recommendations for cleaning electrical contacts.
Outlines the warranty duration for different Deltran charger models.
Specifies conditions that may void the limited warranty.
Details warranty exclusions, limitations, and implied warranties.
Explains when Warranty Evaluation, Shipping & Handling fees apply.
Details the fee amounts based on receipt and time from purchase.
