© DENAFRIPS CO. LTD. & VINSHINE AUDIO PTE. LTD. (SINGAPORE)
ALL RIGHTS RESERVED
Figure 2. ARCE STREAMER Rear Panel
Description:
(1) AC Power Supply
CAUTION! Select the correct AC Power Supply voltage prior supplying the power to the
ARCE STREAMER. The voltage selector switch is located underneath the ARCE STREAMER
chassis.
(2) USB
USB ports for USB Storage Devices local files play.
(3) NET
Ethernet RJ45 Network Port. Connect Arce Streamer to the Home Network (Router). The
router shall assign an IP address to the Arce Streamer. Once the NET LED on the front panel
is turned on, the streamer is ready to use.
(4) Digital Output Interfaces
There are 4 Digital Output Interfaces, namely, COAX, AES, OPT, I2S-A. All outputs are active
simultaneously.
(5) CLOCK IN
The Arce Streamer supports the following clock frequencies input, leveraging the high-
quality OCXO of the TERMINATOR II or TERMINATOR PLUS DAC, it may be connected to Arce
CLOCK-IN to improve the sonic performance.
MASTER CLOCK
• 45.1548MHz, 49.152Mhz
NOTE:
The ARCE STREAMER chassis is connected to the power supply earth.
To Next Page
Loading...