EasyManua.ls Logo

DenMat SOL User Manual

DenMat SOL
168 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
SOL. Everything you want in a laser.
Call DenMat at 800.445.0345 or visit DenMat.com.
©2013 DenMat Holdings, LLC. 1017 W. Central Ave., Lompoc, CA 93436 USA 823057299 04/13 DO

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the DenMat SOL and is the answer not in the manual?

DenMat SOL Specifications

General IconGeneral
BrandDenMat
ModelSOL
CategoryMeasuring Instruments
LanguageEnglish

Summary

Figure 1.0 Panel Buttons

EMERGENCY STOP

Turns active laser output OFF.

B WARNINGS AND PRECAUTIONS

EMERGENCY TERMINATION OF LASER EMISSIONS

Methods to terminate laser energy emission in emergency situations.

C INDICATIONS FOR USE

D FACILITY AND ENVIRONMENTAL CONSIDERATIONS

E GENERAL SAFETY WITH THE SOL LASER

General Safety Considerations

Responsibility for safe use shared by the entire dental team.

Eye and Skin Protection

Mandatory use of appropriate laser safety eyewear.

Emergency Shutdown Options:

Actions to terminate laser emissions in an emergency.

F INSTALLATION AND SETUP

KEY SWITCH

Safety feature to prevent unauthorized operation of the laser.

G QUICK START INSTRUCTIONS

SOL Quick Start Instructions

Step-by-step guide for initial setup and basic operation.

H CONTROLS, OPERATION & USE

READY (SOL ACTIVATION)

Preparing the system for laser activation.

EMERGENCY STOP

Immediate deactivation of laser output.

PROCEDURAL RECOMMENDATIONS FOR USING THE SOL LASER

HARD TISSUE PROCEDURES

Statement that the SOL Laser is not indicated for hard tissue procedures.

CALIBRATION

Procedure for maintaining optimal laser output accuracy.

SINGLE USE TIPS FOR INFECTION CONTROL

Importance of changing disposable tips between patients.

TEST FIRING THE SOL DIODE LASER

Performing a test fire before intraoral use.

USING THE SOL DIODE LASER

Guidelines for using the SOL Diode Laser for patient treatment.

L SOL SERVICE AND TROUBLESHOOTING

NO VISIBLE LIGHT OR DIFFUSE LIGHT TRANSMITTED BY THE AIMING BEAM

Troubleshooting steps for lack of visible light from the aiming beam.

REPLACING THE BATTERY

Procedure for replacing the system's rechargeable battery.

REPLACING THE FIBER OPTIC HAND PIECE

Procedure for replacing the fiber optic handpiece.

ALL OTHER CONDITIONS

Steps to take when the SOL fails to operate correctly.