Denon AV8802 - DTS:X Firmware Update; How to Update

DTS:X FIRMWARE UPDATE FOR THIS UNIT
This unit needs a rmware update to enjoy DTS:X.
How to update
1. When the DTS:X rmware update is available, the following screen will appear on
yourTVafteryouturnontheunitandestablishaninternetconnection.
q w e
2. Selectoneofthefollowingoptionsfromonscreendisplay.
 q Update Now
 Start the update process.
 w Update Later
 The following screen will appear.
w-1
w-2
w-1. Remind Me Later
Will ask if you want to update the next time
you turn the unit on.
w-2. Update during Standby
The unit’s rmware will update the next time
you turn it o.
 e Ignore
 Do not update the rmware of your unit.
%
You can also update rmware of the unit from the setup menu.
1. Press the SETUP button on the Remote Control.
2. Select General → Firmware → Update
3. Select Update.
3520 10413 00AM
Copyright © 2015 D&M Holdings Inc. All Rights Reserved.
EN