Denon AVC-X8500HA - Page 272

Remote ID
Set when you operate another Denon AV amplifier with the remote control
unit of this unit. Match the remote control unit you are using with the
remote ID of this unit.
o
Settings
1
Press ZONE SELECT to switch the zone mode.
The J indicator lights.
2
Press SETUP.
The menu is displayed on the TV screen.
3
Use ui to select “General”, then press ENTER.
4
Use ui to select “Remote ID”, then press ENTER.
5
Change the ID for the remote control unit. (v p. 289)
6
Press ENTER.
The Remote ID for this unit is set to the same ID as the one for the
remote control unit.
Usage Data
To help us improve our products and customer service, Denon collects
anonymous information about how you use this unit (such as frequently
used input sources and sound modes and speaker settings).
Denon will never provide any information we collect to third parties.
Yes:
Provide information on the operating status
of this unit.
No:
Do not provide information on the operating
status of this unit.
Contents Connections Playback Settings Tips Appendix
272
Front panel Display Rear panel Remote Index