Need help?Do you have a question about the Denon AVC-A1H and is the answer not in the manual?
General| Channels | 15.4 |
|---|---|
| Power Output | 150W per channel (8 ohms, 20Hz-20kHz, 0.05% 2ch Drive) |
| HDMI Outputs | 3 |
| Audio Formats | Dolby Atmos, DTS:X, Auro-3D, IMAX Enhanced |
| Wireless Connectivity | Wi-Fi, Bluetooth |
| Type | AV Amplifier |
| IMAX Enhanced | Yes |
| 8K/60Hz Pass-through | Yes |
| 4K/120Hz Pass-through | Yes |
| HDR Support | HDR10, HDR10+, Dolby Vision, HLG |
| eARC | Yes |
| Phono Input | Yes |
| THD | 0.05% |
| Frequency Response | 10 Hz - 100 kHz |
| Input Sensitivity | 200 mV |
| Signal-to-Noise Ratio | 102 dB |
| Ethernet | Yes |
| USB Port | Yes |
| Multi-Room Audio | HEOS |
| Amplifier Type | Class AB |
Details the unit's advanced features and technologies.
Details how to install speakers according to typical configurations.
Explains how to connect speaker cables and subwoofers correctly.
Covers turning the unit on and selecting input sources.
Describes how to play audio/video from various devices.
Covers settings related to audio playback and calibration.
Details settings for HDMI output, pass-through, and control.
Covers input connector assignment and audio input modes.
Explains speaker setup and Audyssey calibration process.
To Next Page
