Inputs
Perform settings related to input source playback.
You do not have to change the settings to use the unit. Make settings when needed.
Input Assign
By making connections as indicated by the input sources printed on the
audio/video input connectors of this unit, you can just press one of the
input source select buttons to easily play back audio or video from a
connected device.
Please change the assignment of the HDMI input connector, digital audio
input connector and analog audio input connector when connecting an
input source that differs from that printed to the audio/video input
connectors of this unit.
Sets the audio input mode for each “INPUT MODE” source. “AUTO” is
normally recommended for this setting. This automatically detects and
plays signal input to this unit prioritized in the following order: HDMI >
DIGITAL > ANALOG.
CBL/SAT
Media Player
Blu-ray
Game1
Game2
AUX1
AUX2
TV Audio
CD
1
[ HDMI ] [ DIGITAL ] [ ANALOG ] [ INPUT MODE ]
2
3
4
5
6
7
-
-
1
2
-
-
-
3
4
-
5
COAX1
COAX2
-
-
-
-
-
OPT1
OPT2
AUTO
AUTO
HDMI
HDMI
HDMI
AUTO
AUTO
DIGITAL
AUTO
Inputs/Input Assign
Changes HDMI input assignments.
Set Defaults
0
By default, each item is set as follows.
Input source
Input connector
INPUT
MODE
HDMI DIGITAL
ANALOG
CBL/SAT 1 COAX1 1 AUTO
Media Player 2 COAX2 2 AUTO
Blu-ray 3 – – HDMI
Game1 4 – – HDMI
Game2 5 – – HDMI
AUX1 6 – 3 AUTO
AUX2 7 – 4 AUTO
TV Audio – OPT1 – DIGITAL
CD – OPT2 5 AUTO
Contents Connections Playback Settings Tips Appendix
197
Front panel Display Rear panel Remote Index
To Next Page
Loading...
Need help?
General
