Denon AVR 2308CI - AV Receiver User Manual

- 26 -
EVENT PARAMETER
function example
Z2
PHONO
MULTI ZONE-2 source change
Z2PHONO<CR>
|
---The name of PARAMETER is
|
IPOD
the same as that of the time of SI COMMAND.
Z2IPOD<CR>
SOURCE
MULTI ZONE-2 mode cancel
Z2SOURCE<CR>
**
MULTI ZONE-2 VOLUME change , **:10 to 99 by ASCII
Z280<CR>
98 = +18dB(MAX)
80 = 0dB
10 = -70dB
99 = ---(MIN)
ON
MULTI ZONE-2 ON/OFF change
Z2ON<CR>
OFF Z2OFF<CR>
Z2MU
ON
ZONE2 OUTPUT MUTE ON/OFF change
Z2MUON<CR>
OFF Z2MUOFF<CR>
Z2CV
FL **
**:38 to 62 by ASCII , 50=0dB
Z2CVFL 50<CR>
FR **
**:38 to 62 by ASCII , 50=0dB
Z2CVFR 50<CR>
The PARAMETER of Z2 EVENT : Uses two ASCII characters. (see page4 J) section)
The PARAMETER of Z2 EVENT : Invalid at AVC-2308 for JAPAN

Denon AVR 2308CI - AV Receiver Specifications

General

Brand	Denon
Model	AVR 2308CI - AV Receiver
Category	Receiver
Language	English