Do you have a question about the Denon AVR 2308CI - AV Receiver and is the answer not in the manual?
Channels | 7.1 |
---|---|
HDMI Inputs | 3 |
HDMI Outputs | 1 |
Response Bandwidth | 10 Hz - 100 kHz |
Input Impedance | 47 kΩ |
Input Sensitivity | 200 mV |
HDMI Switching | Yes |
Video Conversion/Scaling | Yes (up to 1080p) |
Frequency Response | 10 Hz - 100 kHz |
Tuner Bands | AM/FM |
Power Output (per channel) | 100 Watts @ 8 Ohms, 20 Hz - 20 kHz, THD: 0.08% |
Audio Formats Supported | Dolby Digital, Dolby Digital Plus, Dolby TrueHD, DTS, DTS-HD Master Audio, DTS |
Video Formats Supported | 1080p, 720p, 480p |
Network Connectivity | Ethernet |
Weight | 28.7 lbs |
Total Harmonic Distortion | 0.08 % |
Audio D/A Converter | 24-bit/192 kHz |
Surround Sound Effects | DTS Neo:6 |
Sound Effects | Cinema EQ |
Connectors | Composite, Optical, Coaxial, RCA |
Width | 17.1 in |
Specifies the DB-9 pin connector, communication format, speed, and data length for RS-232C.
Defines COMMAND, EVENT, RESPONSE data forms and the ASCII command structure.
Details command/event interactions, surround mode changes, and volume adjustments.
Lists commands for power control and master volume adjustment.
Details channel volume control commands for various speaker configurations.
Covers commands for mute, input source selection, and zone control.
Lists commands for surround sound settings and Zone 2 operations.
Details commands for source selection and digital input configuration.
Lists commands for video selection and various surround sound modes.
Expands on MS surround modes, quick select, and VS scaling/resolution.
Covers commands for tone defeat, surround back modes, and cinema/EQ adjustments.
Details commands for selecting audio modes and configuring room equalization.
Lists commands for treble, DCO, LFE, and effect level adjustments.
Covers commands for audio delay and AFD (Automatic Frequency Detection) control.
Details commands for panorama, dimension, and center channel width adjustments.
Lists commands for attenuator, SWR, and room size settings.
Covers commands for night mode and audio restorer settings.
Lists commands for Z2 input source selection and volume adjustment.
Details commands for Z2 output mute and zone 2 channel volume adjustments.
Commands for tuning frequency up/down and setting AM/FM bands.
Commands for controlling tuner presets and memory functions.
Commands for XM channel selection, preset tuning, and memory.
Commands to retrieve XM status, channel name, artist, title, and signal level.
Commands for iPod navigation, playback, and search functions.
Commands to retrieve and display iPod information.
Commands for navigating menus, cursor movement, and entering/returning.
Commands to lock or unlock remote control functionality.
Commands to lock or unlock panel buttons and master volume.
Lists events and responses for power and master volume control.
Details events and responses for channel volume control across speaker configurations.
Lists events/responses for input source, zone, and surround status.
Covers events/responses for source, digital input, and video selection.
Lists events and responses related to various MS surround sound modes.
Lists events/responses for DTS modes, stereo, and quick select settings.
Details events and responses for VS aspect ratio and scaler settings.
Lists events/responses for tone defeat, surround back, and cinema/EQ.
Covers events/responses for audio modes and room equalization.
Lists events/responses for PS audio adjustments like DCO, LFE, effect, delay, etc.
Lists events/responses for night mode and audio restorer settings.
Lists events/responses for Z2 source, volume, mute, and channel control.
Lists events/responses for tuner frequency, preset, band, and tuning mode.
Lists events/responses for XM channel, preset, status, and information.
Defines IPA/IPE commands for retrieving onscreen display information and data formats.
Provides examples of IPA commands for ASD-1R and ASD-3N/W devices.
Continues providing specific examples of IPA commands for ASD-3N/W devices.
Provides examples of IPE commands and details their data structures and formats.
Provides examples of IPE commands for ASD-1R and ASD-3N/W devices.
Provides specific examples of IPA commands for ASD-3N/R devices.
Provides examples for SY remote and panel lock commands.