Adjusting the volume of each channel to match the input source (Ch Level Adjust)
.
The volume of each channel can be changed while listening to music. You
can set this for each input source.
1
Press CH LEVEL.
The “Ch Level Adjust” screen is displayed.
2
Use ui to select the channel that you wish to adjust.
3
Use o p to adjust the volume.
–12.0 dB – +12.0 dB (Default : 0.0 dB)
0
Select “Reset” and press ENTER if you want to restore the adjustment values of
the various channels to “0.0 dB” (default).
0
Headphone volume can be adjusted when a headphone is connected.
0
“Ch Level Adjust” settings are stored for each input source.
0
You can only set this for speakers that output audio. In addition, you cannot set
this when in the menu “HDMI Audio Out” is set to “TV”. (v
p. 77)
Contents Connections Playback Settings Tips Appendix
62
Front panel Display Rear panel Remote Index
To Next Page
Loading...
