Need help?Do you have a question about the Denon AVR-S900W and is the answer not in the manual?
General| Channels | 7.2 |
|---|---|
| HDMI Inputs | 8 |
| HDMI Outputs | 2 |
| Wi-Fi | Yes |
| Bluetooth | Yes |
| 4K Ultra HD Pass-through | Yes |
| Dolby Atmos | Yes |
| DTS:X | No |
| HDMI Pass-Through | Yes |
| Input Impedance | 47 kOhm |
| Input Sensitivity | 200 mV |
| THD at rated output | 0.08% |
| Signal-To-Noise Ratio | 98 dB |
| DAC Resolution | 24-bit / 192kHz |
| HDMI Switching | Yes |
| AirPlay | Yes |
| DLNA | Yes |
| Dimensions | 17.1 x 6.6 x 13.3 inches |
| Power Output | 90 W |
| Response Bandwidth | 10Hz-100kHz |
| Output Impedance / Channel | 6 Ohm |
| Inputs | HDMI |
| Outputs | HDMI |
| Supported Audio Formats | MP3, WMA, AAC, FLAC, WAV |
| Supported Video Formats | 4K |
| Output Power / Channel | 90W (8 ohms, 20Hz-20kHz, 0.08% THD) |
Describes audio performance from discrete circuit technology.
Details support for 4K 60Hz input/output and image processing.
Details the layout and functions of the AV receiver's front panel.
Illustrates and labels all connectors and ports on the rear of the unit.
Describes the functions of each button on the remote control.
Guides placement of speakers (front, center, surround, etc.) for optimal audio.
Explains the process of connecting speaker cables to the unit's terminals.
Instructions for connecting the unit to a network using a LAN cable.
Details the process for connecting the unit to a wireless network.
Procedure for powering the unit on and off.
Guide to choosing and switching between different audio/video inputs.
How to control the audio output level.
Instructions for muting audio output.
How to set repeat playback modes for supported sources.
How to enable random playback of tracks.
Instructions on how to save preferred content for quick access.
Allows manual adjustment of bass and treble for sound shaping.
Selects picture modes to optimize visual quality based on content.
Allows synchronized music playback across multiple zones.
Details the speaker terminal connections for ZONE2 audio output.
Adjusts the output level for the center channel to clarify dialogue.
Adjusts the volume level for the subwoofer.
Step-by-step guide for performing Audyssey speaker calibration.
Selects power amplifier usage method to match speaker system.
Selects low range signals to be reproduced by the subwoofer.
Displays network information such as IP address and MAC address.
Chooses connection method to home network (wired LAN or wireless LAN).
Selects how network settings are connected to the network automatically.
Sets the display language for the menu on the TV screen.
Reduces power consumption when the unit is on.
Addresses issues related to the unit not powering on or unexpectedly turning off.
Steps to diagnose and fix issues with no audio output from speakers.
Troubleshooting steps when no picture is displayed on the TV.
Troubleshooting steps when an iPod fails to connect or play.
Solutions for when USB memory devices are not recognized or playable.
Troubleshooting steps for Bluetooth connection and playback issues.
Solutions for when internet radio stations cannot be accessed or played.
Details power amplifier ratings and output connectors.
Details wireless LAN standards, security, frequency, and channels.
Lists Bluetooth system specifications, transmission power, and supported profiles.
Lists general specifications like power supply, consumption, and standby modes.
To Next Page
