Name: Denon AVR-S900W
Brand: Denon
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Cannot connect to a wireless LAN network

Symptom Cause / Solution Page

Cannot connect to the

network.

The network name (SSID), password and encryption setting have not been set up correctly. Configure the

network settings according to the setting details of this unit.

187

Shorten the distance from the wireless LAN access point and remove any obstructions to improve access

first before re-connecting again. Place the unit away from microwave ovens and other network access

points.

－

Configure the access point channel settings away from channels that are being used by other networks. －

This unit is not compatible with WEP (TSN). －

Cannot connect to WPS.

Check that the WPS mode of the router is operating. －

Click the “Connect” button displayed on the TV within 2 minutes. －

A router/settings that are compatible with WPS 2.0 standards are required. Set the encryption time to

“None”, “WPA-PSK (AES)” or WPA2-PSK (AES).

187

If the router encryption method is WEP/WPA-TKIP/WPA2-TKIP, you cannot connect by using the WPS

button. In this case, use the “Scan Networks” or “Manual” method to connect.

－

Cannot connect to the

network using iPhone/iPod

touch/iPad.

Update the iPhone/iPod touch/iPad firmware to the latest version. －

When using a USB cable to configure the settings, the iOS device firmware version needs to support

iOS5 or later. When configuring the settings via a wireless connection, iOS7 or later needs to be

supported.

－

Contents Connections Playback Settings Tips Appendix

220

Front panel Display Rear panel Remote Index

Other manuals for Denon AVR-S900W

Questions and Answers:

Need help?

Do you have a question about the Denon AVR-S900W and is the answer not in the manual?

General