Denon AVR-S900W User Manual

Changing the settings
1
Set the items below to the settings you want to
register.
The following settings from A to H can be memorized for MAIN
ZONE, and settings A and B can be memorized for ZONE2.
A
Input source
(v
p. 52)
B
Volume (v
p. 53)
C
Sound mode (v p. 112)
D
Audyssey (Audyssey MultEQ
®
, Audyssey Dynamic EQ
®
,
Audyssey Dynamic Volume
®
) (v p. 148 - 150)
E
“Restorer” (v
p. 146)
F
“Adjusting the volume of each channel to match the input source
(Channel Level Adjust)” (v p. 107)
G
“Displaying your desired video during audio playback (Video
Select)” (v p. 109)
H
“Adjusting the picture quality for your viewing environment
(Picture Mode)” (v
p. 110)
Press and hold QUICK SELECT while a radio station is being received or a
track is being played back with any of the following sources, the current radio
station or track is memorized.
0
Tuner / Internet Radio / Media Server / Pandora / SiriusXM / Favorites /
iPod/USB
2
Press MAIN or ZONE2 to select the operating zone with
the remote control.
The button for the selected zone is lit.
3
Press and hold the desired QUICK SELECT until
“Quickz Memory” or “Z2 Quickz
Memory” appear on
the display.
The current settings will be memorized.
z is displayed the number for the QUICK SELECT button you
pressed.
o
Changing the Quick Select Name
The MAIN ZONE Quick Select name displayed on the TV screen or
display of this unit can be changed to a different name.
For the name change method, see “Quick Select
Names” (v
p. 194).
Contents Connections Playback Settings Tips Appendix
129
Front panel Display Rear panel Remote Index

Denon AVR-S900W Specifications

General

Channels	7.2
HDMI Inputs	8
HDMI Outputs	2
Wi-Fi	Yes
Bluetooth	Yes
4K Ultra HD Pass-through	Yes
Dolby Atmos	Yes
DTS:X	No
HDMI Pass-Through	Yes
Input Impedance	47 kOhm
Input Sensitivity	200 mV
THD at rated output	0.08%
Signal-To-Noise Ratio	98 dB
DAC Resolution	24-bit / 192kHz
HDMI Switching	Yes
AirPlay	Yes
DLNA	Yes
Dimensions	17.1 x 6.6 x 13.3 inches
Power Output	90 W
Response Bandwidth	10Hz-100kHz
Output Impedance / Channel	6 Ohm
Inputs	HDMI
Outputs	HDMI
Supported Audio Formats	MP3, WMA, AAC, FLAC, WAV
Supported Video Formats	4K
Output Power / Channel	90W (8 ohms, 20Hz-20kHz, 0.08% THD)