EasyManuals Logo

Denon AVR-S660H User Manual

Denon AVR-S660H
242 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #141 background imageLoading...
Page #141 background image
GRelation between the “4K/8K Signal Format” setting and supported
resolutionsH
Support
Resolution
Color
Space
Pixel
Depth
4K/8K Signal Format
Standard Enhanced
8K
Enhanced
4K 24Hz,
4K 30Hz,
4K 25Hz
RGB /
YCbCr 4:4:4
8 bit
P P P
10,12 bit
P P
YCbCr 4:2:2 12 bit
P P P
4K 60Hz,
4K 50Hz
YCbCr 4:2:0
8 bit
P P P
10,12 bit
P P
RGB /
YCbCr 4:4:4
8 bit
P P
10,12 bit
P
YCbCr 4:2:2 12 bit
P P
4K 120Hz,
4K 100Hz
YCbCr 4:2:0
8,10,12
bit
P
RGB /
YCbCr 4:4:4
8,10 bit
P
YCbCr 4:2:2 12 bit
P
8K 24Hz,
8K 30Hz,
8K 25Hz
YCbCr 4:2:0
8,10,12
bit
P
RGB /
YCbCr 4:4:4
8,10 bit
P
YCbCr 4:2:2 12 bit
P
8K 60Hz,
8K 50Hz
YCbCr 4:2:0 8, 10 bit
P
0
When setting this to “Enhanced”, we recommend using a “Premium High
Speed HDMI Cable” or “Premium High Speed HDMI Cable with Ethernet” that
has an “HDMI Premium Certified Cable” label attached to the product
package.
0
When setting this to “8K Enhanced”, we recommend using a certified “Ultra
High Speed HDMI cable”.
0
When this setting is “Enhanced” or “8K Enhanced”, configure the television or
playback device settings to match this setting.
0
When this setting is “Enhanced” or “8K Enhanced”, video may not be output
correctly depending on the connected playback device or HDMI cable. In this
case, change this setting to “Standard”.
0
“Custom” is displayed for the setting item if our service engineers or custom
installers has configured the HDMI signal format for this unit.
0
“4K/8K Signal Format” can also be set by the following procedure. However,
the menu screen is not displayed. Watch the display while configuring the
setting.
1. Press and hold the main unit’s TUNE + and MODE at the same time for at
least 3 seconds.
“V.Format:< NTSC>” appears on the display.
2. Press the main unit's DIMMER.
“4K/8K:<Enhanced>” appears on the display.
3. Use the main unit's TUNE + or TUNE – and select the 4K/8K Signal Format.
4. Press the main unit’s STATUS to complete the setting.
Contents Connections Playback Settings Tips Appendix
141
Front panel Display Rear panel Remote Index

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Denon AVR-S660H and is the answer not in the manual?

Denon AVR-S660H Specifications

General IconGeneral
Receiver typestereo
Frequency range10 - 100000 Hz
Input sensitivity200 mV
Audio output channels5.2 channels
Signal-to-Noise Ratio (SNR)98 dB
Total Harmonic Distortion (THD)1 %
Power output per channel (1KHz@6 Ohm)135 W
Power output per channel (20-20KHz@8 Ohm)75 W
HDMI in6
Line-inYes
Composite video in2
USB ports quantity1
Connectivity technologyWired & Wireless
Speakers connectivity typeRCA
AM band range520 - 1710 kHz
FM band range87.5 - 107.9 MHz
Supported radio bandsAM, FM
Optical drive includedNo
3D-
DisplayVFL
HDCP version2.3
Product colorBlack
Audio decodersDTS Neo:6, DTS-HD Master Audio, Dolby Surround, Dolby TrueHD
Volume controlRotary
AC input voltage230 V
AC input frequency50 Hz
Power consumption (standby)0.1 W
Power consumption (typical)340 W
Package depth435 mm
Package width523 mm
Package height232 mm
Package weight9700 g
Weight and Dimensions IconWeight and Dimensions
Depth339 mm
Width434 mm
Height151 mm
Weight7800 g

Related product manuals