EasyManuals Logo

Denon AVR-S660H User Manual

Denon AVR-S660H
242 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #206 background imageLoading...
Page #206 background image
Resetting network settings
If network contents cannot be played or the unit cannot connect to the network, restarting the unit may improve the problem. We recommend restarting the
unit before returning the settings to the default settings. (v p. 186)
If the operations are not improved by restarting the unit, follow the steps below.
Network settings are reset to the factory default values. Make settings again.
However, the menu “Speaker Config.” and “Video” settings are not reset.
.
X
SOURCE SELECT
TUNER PRESET CH +
TUNER PRESET CH –
1
Press X to turn on power to the unit.
2
Turn SOURCE SELECT to select “HEOS Music”.
3
Press and hold the main unit's TUNER PRESET CH +
and TUNER PRESET CH – at the same time for at least 3
seconds.
4
Remove your fingers from the two buttons when
“Network Reset...” appears on the display.
5
“Completed” is shown in the display when reset is
complete.
0
Before returning the settings to the default settings, use the “Save & Load” function
from the menu to save and restore the details of various settings configured on the
unit. (v p. 181)
0
You can also reset the network settings to the factory defaults using “Reset” -
“Network Settings” in the menu. (v p. 182)
NOTE
0
Do not turn the power off until reset is complete.
Contents Connections Playback Settings Tips Appendix
206
Front panel Display Rear panel Remote Index

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Denon AVR-S660H and is the answer not in the manual?

Denon AVR-S660H Specifications

General IconGeneral
Receiver typestereo
Frequency range10 - 100000 Hz
Input sensitivity200 mV
Audio output channels5.2 channels
Signal-to-Noise Ratio (SNR)98 dB
Total Harmonic Distortion (THD)1 %
Power output per channel (1KHz@6 Ohm)135 W
Power output per channel (20-20KHz@8 Ohm)75 W
HDMI in6
Line-inYes
Composite video in2
USB ports quantity1
Connectivity technologyWired & Wireless
Speakers connectivity typeRCA
AM band range520 - 1710 kHz
FM band range87.5 - 107.9 MHz
Supported radio bandsAM, FM
Optical drive includedNo
3D-
DisplayVFL
HDCP version2.3
Product colorBlack
Audio decodersDTS Neo:6, DTS-HD Master Audio, Dolby Surround, Dolby TrueHD
Volume controlRotary
AC input voltage230 V
AC input frequency50 Hz
Power consumption (standby)0.1 W
Power consumption (typical)340 W
Package depth435 mm
Package width523 mm
Package height232 mm
Package weight9700 g
Weight and Dimensions IconWeight and Dimensions
Depth339 mm
Width434 mm
Height151 mm
Weight7800 g

Related product manuals