To Next Page

To Previous Page

Tips

I want the volume not to become too loud by mistake

Set the volume upper limit for “Limit” in the menu beforehand. This prevents children or others from increasing the volume too much by mistake.

(v p. 132)

I want to keep the volume at the same level when I turn the power on

By default, the volume setting when power was previously set to standby on this unit is applied at next power on with no change. To use a fixed volume

level, set the volume level at power on for “Power On Level” in the menu. (v p. 132)

I want to have the subwoofer always output audio

Depending on the input signals and sound mode, the subwoofer may not output audio. When “Subwoofer Output” in the menu is set to “LFE + Main”,

you can have the subwoofer always output audio. (v p. 163)

I want to make human voices in the movies clearer

Select a setting that makes the dialog easier to hear in the option menu “Dialog Enhancer”. (v p. 93)

I want to keep bass and clarity during playback at a lower volume level

Set “Dynamic EQ” in the menu to “On”. This setting corrects the frequency characteristics to allow you to enjoy clear sound without the bass being lost

even during playback at a lower volume level. (v p. 134)

I want to automatically adjust the volume level difference in content such as TV and movies

Set “Dynamic Volume” in the menu. Volume level changes (between quiet scenes and loud scenes) in TV shows or movies are automatically adjusted

to your desired level. (v p. 135)

Contents

Connections Playback Settings Tips Appendix

187

Front panel Display Rear panel Remote Index