Smart Menu function
This function can be used to configure the settings of this unit, select an
input source and set Tuner and Internet Radio stations using the TV
remote control.
1
Enable the HDMI control function of this unit and the
TV. (v p. 158)
2
Set “Smart Menu” to “On” on this unit. (v p. 161)
3
Select “AV Receiver” in a TV menu such as “Input”z or
“Operate Connected HDMI Device”z.
The Smart Menu of this unit is displayed on the TV.
0
This unit can be operated with the TV remote control while the
Smart Menu is displayed.
z
The selection method differs depending on your TV.
.
Smart Menu
Setup MenuSound ModeSource
Now Playing
Blu-ray
Quick Select 4
Help
Quick Select 3Quick Select 2Quick Select 1
o
Now Playing
Enjoy content from the input source currently selected on this unit.
o
Source
Switch the input of this unit.
If you select “Online Music”, “iPod/USB” or “Tuner”, you can continue
to operate this unit using the TV remote control.
o
Sound Mode
Change the sound mode of this unit.
You can select from the following three sound modes.
Surround:
Surround sound playback according to
the input signal.
Stereo: Stereo playback.
Multi Ch Stereo: Multi-channel stereo playback.
Contents Connections Playback Settings Tips Appendix
128
Front panel Display Rear panel Remote Index
To Next Page
Loading...
Need help?
General
