o
Manual
Enter the name (SSID) and password of the network you wish to
connect to.
1. Set the following items.
SSID:
Input the name of the wireless network
(SSID).
Security:
Select the encryption method according
to the encryption setting of the access
point you are using.
Password: Input the password.
Default Key:
Select the Default Key.
When connecting to a “WEP” encrypted
network, “Default Key” menu is
displayed.
2. Select “Connect” at the end of the setting.
0
The wireless LAN (Wi-Fi) settings of this unit can also be configured from a PC or
tablet that supports wireless LAN connection.
When using a device that has a firmware version of iOS7 or later, “When
connecting using Wi-Fi” (v p. 191) in “Use iOS Device”.
1. Press and hold the TUNE + and TUNE － buttons on the main unit for at least 3
seconds when the power of the unit is on.
2. Connect the wireless LAN of the PC or tablet used to “Denon AVR-S710W”
when the message “Connect your Wi-Fi device to Wi-Fi network called “Denon
AVR-S710W”” appears in the display.
3. Start up the browser and enter “192.168.1.16” in the URL.
4. Use the browser to enter the settings, select “Connect” and then exit the
settings.
Contents Connections Playback Settings Tips Appendix
192
Front panel Display Rear panel Remote Index
To Next Page
Loading...
Need help?
General
