Denon AVR-S710W

Sound modes and channel output
S This indicates the audio output channels or surround parameters that can be set.
D This indicates the audio output channels. The output channels depend on the settings of “Speaker Config.”. (v
p. 180)
.
Sound mode
Channel output
Front L/R Center Surround L/R
Surround Back
L/R
Front Height
L/R
Top Front L/R Top Middle L/R
Front Dolby
Atmos Enabled
L/R
Surround Dolby
Atmos Enabled
L/R
Subwoofer
Direct (2-channel)
S Dz4
Direct (Multi-channel)
SDDDz1 Dz1 Dz1 Dz1 Dz1 Dz1 D
Stereo
S D
Multi Ch In
SDDDz1 Dz3 Dz3 Dz3 Dz3 Dz3 D
Dolby Surround
SDDDz2 DDDDDD
DTS Neural:X
SDDDDDDDDD
Dolby Digital
SDDDDz3 Dz3 Dz3 Dz3 Dz3 D
Dolby Digital Plus
SDDDz1 Dz1 Dz3 Dz3 Dz3 Dz3 D
Dolby TrueHD
SDDDz1 Dz1 Dz3 Dz3 Dz3 Dz3 D
Dolby Atmos
SDDDDDDDDD
DTS Surround
SDDDDz3 Dz3 Dz3 Dz3 Dz3 D
DTS 96/24
SDDDDz3 Dz3 Dz
3 Dz3 Dz3 D
DTS-HD
SDDDz1 Dz1 Dz3 Dz3 Dz3 Dz3 D
DTS Express
SDDDDz3 Dz3 Dz3 Dz3 Dz3 D
DTS:X
SDDDDDDDDD
Multi Ch Stereo
SDDDDDDDDD
Rock Arena
SDDDDDDDDD
Jazz Club
SDDDDDDDDD
Mono Movie
SDDDDDDDDD
Video Game
SDDDDDDDDD
Matrix
SDDDDDDDDD
Virtual
S D
z1
A signal for each channel contained in an input signal is output as audio.
z2 Audio is not output when “Speaker Config.” - “Surround Back” in the menu is set to “1 spkr”. (v p. 181)
z3
Audio is output when the set sound mode name contains “+ Dolby Surround”.
z4 Audio is output when “Subwoofer Mode” in the menu is set to “LFE+Main”. (v
p. 188)
Contents
Connections Playback Settings Tips Appendix
234
Front panel Display Rear panel Remote Index