EasyManuals Logo

Denon AVR-S750H Service Manual

Denon AVR-S750H
161 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #74 background imageLoading...
Page #74 background image
3.1. No picture or sound is output (HDMI to HDMI)
Go to next page.
(9) Are a picture and sound output when the res-
olution of the Blu-ray/DVD player is changed?
(8) When using a DENON Blu-ray/DVD player, is the "HDMI" indicator of the uorescent display lit?
Proceed to YES when using a Blu-ray/DVD player produced by other manufactures.
(10) Is sound output from the speaker terminal of
this unit when the power of the TV is turned
off or the cable connecting the TV to this unit
is removed?
Set the output resolution of the Blu-ray/
DVD player to the resolution supported by
the TV.
The Blu-ray/DVD player may not support the
HDCP repeater function.
Refer to the manufacturer of the Blu-ray/DVD
player.
Check the TV.
(12) Does the TV support HDCP?
(14) Is the TV input setting set to HDMI?
(13) Does the TV support 1080P/4K?
Use a TV that supports HDCP. Computer monitors
cannot be used.
Check the instruction manual of the TV and check
the input setting.
If the TV does not support 1080P/4K, a picture
cannot be output even if the Blu-ray/DVD player is
set to 1080P/4K.
(11) Are a picture and sound output when a differ-
ent Blu-ray/DVD player is used?
The Blu-ray/DVD player is faulty.
NO
NO
YES
YES
YES
YES
NO
NO
YES
YES
YES
NO
NO
NO
No picture or sound is output.
Check the Blu-ray/DVD player.
Check the connection of the HDMI/DVI cable.
(1) Is the HDMI/DVI cable correctly inserted?
(3) Is a certied HDMI cable (with the HDMI mark)
being used?
(4) Is the HDMI/DVI cable shorter than 5m?
(5) When the input signal is Deep Color or 4K, are
you using a "
High speed HDMI cable with
Ethernet
" or "
High speed cable
" that bears the
HDMI logo?
(6) Are a picture and sound output when a differ-
ent HDMI/DVI cable is used?
(2) Is an HDMI/DVI selector, repeater or image
quality improvement device being used?
(7) Are the HDMI output settings of the Blu-ray/
DVD player correct?
Check the connection of the HDMI/DVI cable.
Use a certied HDMI cable (with the HDMI mark).
Replace the HDMI/DVI cable with the one shorter
than 5m (2m is recommended) and check again.
Use an "
High speed HDMI cable with Ethernet
"
or "
High speed cable
" that comes with the HDMI
logo.
The HDMI/DVI cable is faulty.
Remove all of these and connect only the HDMI/
DVI cable.
Check the instruction manual of the Blu-ray/DVD
player and set the HDMI output correctly.
NO
NO
NO
NO
NO
YES
YES
YES
YES
YES
YES
YES
NO
NO
3. HDMI/DVI
Before Servicing
This Unit
Electrical Mechanical Repair Information Updating
74

Other manuals for Denon AVR-S750H

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Denon AVR-S750H and is the answer not in the manual?

Denon AVR-S750H Specifications

General IconGeneral
Receiver typestereo
Frequency range10 - 100000 Hz
Input sensitivity200 mV
Audio output channels7.2 channels
Signal-to-Noise Ratio (SNR)98 dB
Total Harmonic Distortion (THD)10 %
Power output per channel (1KHz@6 Ohm)165 W
Power output per channel (20-20KHz@8 Ohm)75 W
AirPlayYes
DisplayVFL
HDCP version2.3
Apple dockingNo
Product colorBlack
Audio decodersDTS-HD Master Audio, Dolby TrueHD
Volume controlRotary
HDMI in6
Composite video in2
Digital audio optical in1
Package depth432 mm
Package width523 mm
Package height229 mm
Package weight10614 g
AC input voltage120 V
AC input frequency60 Hz
Power consumption (standby)0.5 W
Power consumption (typical)400 W
AM band range520 - 1710 kHz
FM band range87.5 - 107.9 MHz
Supported radio bandsAM, FM
Audio formats supportedAAC, ALAC, DSD, FLAC, MP3, WAV, WMA
Image formats supportedJPEG
Speakers connectivity typeRCA
Weight and Dimensions IconWeight and Dimensions
Depth330 mm
Height152 mm
Weight8618 g

Related product manuals