Checking the reception intensity of
stations (Tuning Aid)
The reception intensity of the currently tuned in frequency is displayed.
Use this if your preferred station cannot be received.
1
Press OPTION during DAB reception.
The option menu screen is displayed.
2
Use ui to select “Tuning Aid”, then press ENTER.
3
Use ui to select a frequency to tune into. It takes
around 4 - 5 seconds to correctly display the reception
signal level after selecting a frequency.
4
If necessary, adjust the position of the antenna so that
the reception signal level beyonds “5”.
The station can now be received.
5
Press ENTER.
Select a station.
0
Stations you have selected before can be re-selected by pressing TUNE + or
TUNE – on the remote control unit.
Setting the order of broadcasting
station (Station Order)
Select your preferred order of service list created by the Auto Scan
function.
1
Press OPTION during DAB reception.
The option menu screen is displayed.
2
Use ui to select “Station Order”, then press ENTER.
3
Use o p to select your preferred order.
Alphanumeric
(Default):
In alphabetical order.
Multiplex: In order of frequency.
Contents Connections Playback Settings Tips Appendix
97
Front panel Display Rear panel Remote Index
To Next Page
Loading...
Need help?
General
Weight and Dimensions
