Denon AVR-X1800H User Manual

Connecting an external power amplifier
You can use this unit as a preamplifier for front channels by connecting an external power amplifier to the PRE OUT connectors. By adding a power
amplifier to front channels, the realness of the sound can be further enhanced.
L
L
R
R
FRONT
AUDIO
SUB-
WOOFER
1
AUDIO
SUB-
WOOFER
2
AUDIO
RL
Power amplifier
Subwoofer
(Primary)
Subwoofer
(Secondary)
0
You can use the “Connection” setting to disconnect the built-in power circuit of front channel and use just your front channel as the Preamplifier. (v p. 190)
Contents Connections Playback Settings Tips Appendix
38
Front panel Display Rear panel Remote Index

Denon AVR-X1800H Specifications

General

Amplifier Channels	7.2
HDMI Version	2.1
HDCP Support	2.3
eARC	Yes
Dolby Atmos	Yes
DTS:X	Yes
Dolby Surround	Yes
DTS Neural:X	Yes
Bluetooth	Yes
AirPlay 2	Yes
HEOS Multi-Room	Yes
Input Sensitivity/Impedance	200 mV / 47 kohms
Supported Audio Formats	MP3, WMA, AAC, FLAC, ALAC, WAV, DSD
Power Output per Channel	80W (8 ohms, 20Hz - 20kHz, 0.08% THD)
HDMI Inputs	6
HDR Support	HDR10+, Dolby Vision, HLG
Wi-Fi	Yes
Phono Input	Yes
Frequency Response	10Hz - 100kHz
Total Harmonic Distortion	0.08%
Signal-to-Noise Ratio	98dB