EasyManuals Logo

Denon AVR-X250BT Service Manual

Denon AVR-X250BT
82 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #70 background imageLoading...
Page #70 background image
2. Video Format and Display Language change mode
2.1. Actions
Select or change "NTSC" or "PAL". Select or change the language.
2.2. Starting up
While the power is On, hold down buttons "
TUNE -
", "
TUNE +
" and "
DIMMER
" for at least 3 seconds.
2.3. Displaying and Selecting Each Mode
Pressing the button each time switches the display shown as follows.
V.Format:<****>
"
STATUS
"
Lang.:<*******>
q
Select Video Format
V.Format:<NTSC>
"
TUNER PRESET CH +
" or "
DIMMER
"
V.Format:<PAL>
Press the "
TUNE -
" button to conrm the displayed mode.
Do not turn off the power until the display switches to the normal mode screen.
w
Select Display Language
Lang.:<ENGLISH>
· E2, E1C model
"
TUNER PRESET CH +
" or "
DIMMER
"
Lang.:<SPANISH>
· E2 model
"
TUNER PRESET CH +
" or "
DIMMER
"
Lang.:<FRENCH >
· E2 model
"
TUNER PRESET CH +
" or "
DIMMER
"
Lang.:<CHINESE>
· E1C model
Press the "
TUNE -
" button to conrm the displayed mode.
Do not turn off the power until the display switches to the normal mode screen.
Before Servicing
This Unit
Electrical Mechanical Repair Information Updating
70

Other manuals for Denon AVR-X250BT

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Denon AVR-X250BT and is the answer not in the manual?

Denon AVR-X250BT Specifications

General IconGeneral
Impedance16 Ω
Receiver typeSurround
Frequency range10 - 100000 Hz
Pre-out connectivityYes
Audio output channels5.1 channels
Signal-to-Noise Ratio (SNR)98 dB
Total Harmonic Distortion (THD)1 %
Power output per channel (1KHz@6 Ohm)90 W
Power output per channel (1KHz@8 Ohm)70 W
Power output per channel (20-20KHz@8 Ohm)130 W
AirPlayNo
DisplayVFD
HDCP version2.2
Product colorBlack
Audio decodersDTS-HD, DTS-HD Master Audio, Dolby Pro Logic II, Dolby TrueHD
HDMI in5
Composite video in2
Digital audio coaxial in-
Supported graphics resolutions3840 x 2160
AM band range522 - 1611 kHz
FM band range87.5 - 108 MHz
Supported radio bandsAM, FM
AC input voltage230 V
AC input frequency50 Hz
Power consumption (standby)0.5 W
Power consumption (typical)330 W
Number of HDMI outputs1
Connectivity technologyWired & Wireless
Speakers connectivity typeClamp terminals
Weight and Dimensions IconWeight and Dimensions
Depth319 mm
Width434 mm
Height151 mm
Weight7500 g

Related product manuals