Denon AVR-X250BT Service Manual

This is not used during servicing. Do not use.
3-5.1. Operations
Exit the PIMG Version Display Mode.
Remove the power plug to exit this mode.
PMIG :********
4.1. Actions
Switches the panel lock mode.
4.2. Starting up
Press "
TUNER PRESET CH -
" and "
QUICK SELECT 3
" simultaneously while on standby.
Panel LOCK:On
4.3. Canceling the selected mode
Press "
TUNER PRESET CH -
" and "
QUICK SELECT 4
" simultaneously while on standby.
Panel LOCK:Off
3-5. PIMG Version Display Mode 4. Front Panel Lock Mode
Before Servicing
This Unit
Electrical Mechanical Repair Information Updating
74

Denon AVR-X250BT Specifications

General

Impedance	16 Ω
Receiver type	Surround
Frequency range	10 - 100000 Hz
Pre-out connectivity	Yes
Audio output channels	5.1 channels
Signal-to-Noise Ratio (SNR)	98 dB
Total Harmonic Distortion (THD)	1 %
Power output per channel (1KHz@6 Ohm)	90 W
Power output per channel (1KHz@8 Ohm)	70 W
Power output per channel (20-20KHz@8 Ohm)	130 W
AirPlay	No
Display	VFD
HDCP version	2.2
Product color	Black
Audio decoders	DTS-HD, DTS-HD Master Audio, Dolby Pro Logic II, Dolby TrueHD
HDMI in	5
Composite video in	2
Digital audio coaxial in	-
Supported graphics resolutions	3840 x 2160
AM band range	522 - 1611 kHz
FM band range	87.5 - 108 MHz
Supported radio bands	AM, FM
AC input voltage	230 V
AC input frequency	50 Hz
Power consumption (standby)	0.5 W
Power consumption (typical)	330 W
Number of HDMI outputs	1
Connectivity technology	Wired & Wireless
Speakers connectivity type	Clamp terminals

Weight and Dimensions

Depth	319 mm
Width	434 mm
Height	151 mm
Weight	7500 g