(8) Then start Firmware Update.
Updating information.
DSP Erasing
DSP Updating..
OSD1 Updating..
OSD2 Updating..
MCU Updating..
(9) After updating the rmware, check the version.
See "1. Version Display Mode"
---Cautions on Firmware Update---
• Do not turn off the power until updating is completed.
• It takes around 25 minutes to complete the update.
Once an update is started, normal operations cannot be performed until it is completed.
The GUI menu settings and image adjustment settings of this unit may be initialized.
Note down the settings before updating, and set them again after updating.
C:\Users\Desktop\ModelName\ModelName_DSP_vXXX.bin
C:\Users\Desktop\ModelName\ModelName_MCU_vXX_XX.bin
C:\Users\Desktop\ModelName\ModelName_OSD1_vXX_XX.bin
C:\Users\Desktop\ModelName\ModelName_OSD2_vXXXXXXXX.bin
Before Servicing
This Unit
Electrical Mechanical Repair Information Updating
81
To Next Page
Loading...
