EasyManuals Logo

Denon AVR-X2600H User Manual

Denon AVR-X2600H
291 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #174 background imageLoading...
Page #174 background image
n
TV set top box/satellite users please note
When using the digital audio output on a TV/satellite box:
To play the video signal assigned to “HDMI” combined with the audio
signal assigned at “Input Assign” - “DIGITAL”, you will also need to
select “DIGITAL” in the “INPUT MODE”.
0
The same input connector can be assigned to multiple input sources. For example,
assign the same HDMI input connector to multiple sources to use each input
source in combination with analog or digital audio as you prefer. In such cases, set
the audio connector for playback in “INPUT MODE”. (This feature will be
supported via firmware update.)
o
HDMI
Set this to change the HDMI input connectors assigned to the input
sources.
1 / 2 / 3 / 4 / 5 / 6 / 7 /
FRONT:
Assign an HDMI input connector to the
selected input source.
– :
Do not assign an HDMI input connector
to the selected input source.
0
When “HDMI Control” or “ARC” is set to “On” in the menu, “HDMI” cannot be
assigned to “TV Audio”. (“ HDMI Control ” (v p. 164), “ ARC ” (v p. 164))
0
The eARC function does not operate when “HDMI” is set as the “TV Audio”
input source.
o
DIGITAL
Set this to change the digital audio input connectors assigned to the
input sources.
COAX (Coaxial) /
OPT1 (Optical) / OPT2:
Assign a digital audio input connector to
the selected input source.
– :
Do not assign a digital audio input
connector to the selected input source.
o
ANALOG
Set this to change the analog audio input connectors assigned to the
input sources.
1 / 2 / 3 / 4:
Assign a analog audio input connector to
the selected input source.
– :
Do not assign a analog audio input
connector to the selected input source.
o
VIDEO
Set this to change the component video input connectors and
composite video input connectors assigned to the input sources.
COMP1 (Component
video) / COMP2 /
VIDEO1 / VIDEO2:
Assign the video input connector to the
selected input source.
– :
Do not assign a video input connector to
the selected input source.
Contents Connections Playback Settings Tips Appendix
174
Front panel Display Rear panel Remote Index

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Denon AVR-X2600H and is the answer not in the manual?

Denon AVR-X2600H Specifications

General IconGeneral
DisplayLCD
HDCP version2.3
Product colorBlack
Audio decoders-
Volume controlRotary
Audio amplifierYes
Amplifier output power7 W
Audio formats supportedAAC, ALAC, FLAC, MP3, WAV, WMA
Supported radio bandsAM, FM
HDMI in1
CertificationISF
Power consumption (typical)500 W
Receiver typeSurround
Audio output channels- channels
Power output per channel (1KHz@6 Ohm)125 W
Power output per channel (20-20KHz@8 Ohm)95 W
Weight and Dimensions IconWeight and Dimensions
Depth237 mm
Width434 mm
Height341 mm
Weight9500 g

Related product manuals