Playback in ZONE2
.
MUTE
ZONE2
POWER
VOLUME
df
X
:
Input source
select
buttons
1
Press ZONE2 to set the operating zone to ZONE2 with
the remote control.
The ZONE2 button lights.
2
Press POWER X to turn on the ZONE2 power.
The ( indicator on the display lights.
0
Power in ZONE2 can be turned on or off by pressing ZONE2
ON/OFF on the main unit.
3
Press the input source select button to select the input
source to be played.
The audio signal of the selected source is output to ZONE2.
0
To perform an operation with the main unit, press ZONE2
SOURCE. Each time you press ZONE2 SOURCE, the input
source changes.
0
Setting the input source of ZONE2 as the “Source” allows you to play the same
content in MAIN ZONE and in ZONE2, regardless of the type of input signal.
0
Set the input source of ZONE2 as the “Source” by pressing the ZONE2
SOURCE button on the main unit.
0
If the MAIN ZONE input source is changed while ZONE2 is selected as the
“Source”, then ZONE2’s input source will be changed to mirror the MAIN
ZONE’s input source.
Contents Connections Playback Settings Tips Appendix
145
Front panel Display Rear panel Remote Index
To Next Page
Loading...
Need help?
General
Weight and Dimensions
