EasyManuals Logo

Denon AVR-X2700H User Manual

Denon AVR-X2700H
310 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #177 background imageLoading...
Page #177 background image
GRelation between the “4K/8K Signal Format” setting and supported
resolutionsH
Support
Resolution
Color
Space
Pixel
Depth
4K/8K Signal Format
Standard Enhanced
8K
Enhanced
4K 24p,
4K 30p,
4K 25p
RGB /
YCbCr 4:4:4
8 bit
P P P
10,12 bit
P P
YCbCr 4:2:2 12 bit
P P P
4K 60p,
4K 50p
YCbCr 4:2:0
8 bit
P P P
10,12 bit
P P
RGB /
YCbCr 4:4:4
8 bit
P P
10,12 bit
P
YCbCr 4:2:2 12 bit
P P
4K 120p,
4K 100p
YCbCr 4:2:0
8,10,12
bit
P
RGB /
YCbCr 4:4:4
8,10 bit
P
YCbCr 4:2:2 12 bit
P
8K 24p,
8K 30p,
8K 25p
YCbCr 4:2:0
8,10,12
bit
P
RGB /
YCbCr 4:4:4
8,10 bit
P
YCbCr 4:2:2 12 bit
P
8K 60p,
8K 50p
YCbCr 4:2:0 8, 10 bit
P
0
When setting this to “Enhanced”, we recommend using a “Premium High
Speed HDMI Cable” or “Premium High Speed HDMI Cable with Ethernet” that
has an “HDMI Premium Certified Cable” label attached to the product
package.
0
When setting this to “8K Enhanced”, we recommend using an “Ultra High
Speed 48 Gbps HDMI cable”.
0
When this setting is “Enhanced” or “8K Enhanced”, configure the television or
playback device settings to match this setting.
0
When this setting is “Enhanced” or “8K Enhanced”, video may not be output
correctly depending on the connected playback device or HDMI cable. In this
case, change this setting to “Standard”.
0
“Custom” is displayed for the setting item if our service engineers or custom
installers has configured the HDMI signal format for this unit.
0
“4K/8K Signal Format” can also be set by the following procedure. However,
the menu screen is not displayed. Watch the display while configuring the
setting.
1. Press and hold the main unit’s ZONE2 SOURCE and STATUS at the same
time for at least 3 seconds.
“V.Format:< NTSC>” appears on the display.
2. Press the main unit's DIMMER.
“4K/8K:<Enhanced>” appears on the display.
3. Use the main unit's TUNER PRESET CH + or TUNER PRESET CH – and
select the 4K/8K Signal Format.
4. Press the main unit’s STATUS to complete the setting.
Contents Connections Playback Settings Tips Appendix
177
Front panel Display Rear panel Remote Index

Table of Contents

Other manuals for Denon AVR-X2700H

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Denon AVR-X2700H and is the answer not in the manual?

Denon AVR-X2700H Specifications

General IconGeneral
AM band range87.5 - 107.9 kHz
Internet radioYes
Supported radio bandsFM
Internet radio services supportedAmazon Music, Deezer, Pandora, Spotify, Tidal
Audio output channels7.1 channels
Power output per channel (1KHz@6 Ohm)150 W
Power output per channel (1KHz@8 Ohm)125 W
Power output per channel (20-20KHz@8 Ohm)95 W
Power consumption (standby)0.5 W
Power consumption (typical)500 W
HDMI in6
Audio (L/R) in1
Composite video in2
Digital audio coaxial in-
HDCP version2.3
Apple dockingNo
Product colorBlack, Silver
Audio decodersDSD, DTS Neo:X, DTS Virtual:X, DTS-HD Master Audio, DTS:X, Dolby Atmos, Dolby Pro Logic II, Dolby Surround, Dolby TrueHD
Connector contacts platingGold
Connectivity technologyWired & Wireless
Speakers connectivity type3.5mm
Audio formats supportedAAC, ALAC, DSD, FLAC, MP3, WAV, WMA
Supported video modes1080p, 2160p, 3840p
Weight and Dimensions IconWeight and Dimensions
Depth429 mm
Width520 mm
Height243 mm
Weight11500 g

Related product manuals