EasyManuals Logo

Denon AVR-X2800H User Manual

Denon AVR-X2800H
302 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #205 background imageLoading...
Page #205 background image
Manual Setup
Perform when setting the speakers manually or when changing settings
made in Audyssey
®
Setup.
0
If you enable new speakers in the speaker configuration menu after
performing Audyssey
®
Setup, you will no longer be able to select
Audyssey MultEQ
®
XT, Audyssey Dynamic EQ
®
or Audyssey Dynamic
Volume
®
. (v p. 177)
0
Changing the following settings:
Speaker size (Large or Small) / Distances / Levels / Crossovers settings
will not disable Audyssey
®
or require running Audyssey
®
Setup again.
0
“Manual Setup” can be used without changing the settings. Please set if
necessary.
Amp Assign
Select the power amplifier usage method to match your speaker system.
See “Speaker configuration and “Amp Assign” settings” (v p. 39)
regarding the speaker configuration and connection.
o
Assign Mode
Select how to use the power amp.
Surround Back
(Default):
Setting for 7.1-channel playback using
surround back speakers.
Front Height:
Setting for 7.1-channel playback using
front height speakers.
Top Front:
Setting for 7.1-channel playback using
top front speakers.
Top Middle:
Setting for 7.1-channel playback using
top middle speakers.
Front Dolby:
Setting for 7.1-channel playback using
front Dolby Atmos Enabled speakers.
Surround Dolby:
Setting for 7.1-channel playback using
surround Dolby Atmos Enabled
speakers.
Contents Connections Playback Settings Tips Appendix
205
Front panel Display Rear panel Remote Index

Other manuals for Denon AVR-X2800H

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Denon AVR-X2800H and is the answer not in the manual?

Denon AVR-X2800H Specifications

General IconGeneral
Receiver typestereo
Audio output channels7.1 channels
Power output per channel (1KHz@6 Ohm)185 W
Power output per channel (20-20KHz@8 Ohm)95 W
DisplayLED
Apple dockingNo
Product colorBlack
Audio decodersDTS Virtual:X, DTS-HD Master Audio, DTS:X, Dolby Atmos, Dolby Surround, Dolby TrueHD
AC input voltage230 V
AC input frequency50 - 60 Hz
Power consumption (standby)0.5 W
Power consumption (typical)500 W
Operating temperature (T-T)5 - 35 °C
Bluetooth version4.2
Bluetooth profilesA2DP, AVRCP, SBC
FM band range87.5 - 108 MHz
Supported radio bandsDAB, FM, MW
Internet radio services supported-
HDMI in6
Digital audio coaxial in1
Digital audio optical in2
Speakers connectivity typeClamp terminals
Weight and Dimensions IconWeight and Dimensions
Depth341 mm
Width434 mm
Height237 mm
Weight9500 g

Related product manuals