EasyManuals Logo

Denon AVR-X3700H User Manual

Denon AVR-X3700H
313 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #185 background imageLoading...
Page #185 background image
Video
Make video-related settings.
Picture Adjust
Picture quality can be adjusted.
0
This can be set when “HDMI” is assigned for each input source. (v p. 201)
0
“Contrast”, “Brightness”, “Saturation”, “Noise Reduction” and “Enhancer” can be
set when “Picture Mode” is set to “Custom”. (v p. 185)
0
“Picture Adjust” settings are stored for each input source.
0
“Picture Adjust” cannot be set when 4K or 8K signals are input.
0
This cannot be set when “Video Mode” is set to “Bypass” or “i/p Scaler” is set to
“Off”. (v p. 193)
0
“Picture Adjust” cannot be set when sound mode is set to “IMAX DTS” or “IMAX
DTS:X”.
o
Picture Mode
Select the desired picture mode according to the video content and
your viewing environment.
Standard:
The standard mode suited for most living
room viewing environments.
Movie:
A mode suited for watching movies in a
dark room such as a theater room.
Vivid:
A mode that makes graphic images for
games, etc. brighter and more vivid.
Streaming:
A mode suited for low bit rate video
sources.
ISF Day:
A mode suited for watching movies in a
bright room during the day.
ISF Night:
A mode suited for watching movies in a
dark room at night.
Custom: Adjusts the picture quality manually.
Off
(Default):
No picture quality adjustment is done with
this unit.
Contents Connections Playback Settings Tips Appendix
185
Front panel Display Rear panel Remote Index

Other manuals for Denon AVR-X3700H

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Denon AVR-X3700H and is the answer not in the manual?

Denon AVR-X3700H Specifications

General IconGeneral
Channels9.2
HDMI Outputs3
Dolby AtmosYes
DTS:XYes
IMAX EnhancedYes
4K/120Hz Pass-throughYes
8K/60Hz Pass-throughYes
Wi-FiYes
BluetoothYes
HEOS Built-inYes
Impedance4 - 16 ohms
Frequency Response10 Hz - 100 kHz
Input Sensitivity200 mV
HDCP Support2.3
HDR CompatibilityHDR10, HDR10+, Dolby Vision, HLG
Audio Return Channel (ARC)eARC
Phono InputYes
EthernetYes
USBYes
AM/FM TunerYes
Power Output per Channel105W (8 ohms, 20 Hz - 20 kHz, THD 0.08%, 2ch driven)
Signal-to-Noise Ratio100 dB
Video UpscalingYes, up to 8K
Dimensions (W x H x D)434 x 167 x 389 mm
Weight12.5 kg

Related product manuals