Inputs
Perform settings related to input source playback.
You do not have to change the settings to use the unit. Make settings when needed.
Input Assign
By making connections as indicated by the input sources printed on the
audio/video input connectors of this unit, you can just press one of the
input source select buttons to easily play back audio or video from a
connected device.
Please change the assignment of the HDMI input connector, digital audio
input connector, analog audio input connector, component video input
connector and video input connector when connecting an input source
that differs from that printed to the audio/video input connectors of this
unit.
Sets the audio input mode for each “INPUT MODE” source. “AUTO” is
normally recommended for this setting. This automatically detects and
plays signal input to this unit prioritized in the following order: HDMI >
DIGITAL > ANALOG.
.
DIGITAL ANALOGHDMI VIDEO INPUT MODE
Inputs/Input Assign
Set Defaults
CBL/SAT
DVD
Blu-ray
Media Player
Game
AUX
8K
TV Audio
1
2
3
4
5
6
7
(8K)
-
1
2
3
-
4
-
-
-
VIDEO1
COMP1
VIDEO2
COMP2
VIDEO3
-
-
-
COAX1
COAX2
-
OPT2
-
-
-
OPT1
Changes HDMI input assignments
CD - 5 -
AUTO
AUTO
AUTO
AUTO
AUTO
HDMI
HDMI
DIGITAL
ANALOG
-
0
By default, each item is set as follows.
Input source
Input connector
INPUT
MODE
HDMI DIGITAL
ANALOG
VIDEO
CBL/SAT 1 COAX1 1 VIDEO1 AUTO
DVD 2 COAX2 2 COMP1 AUTO
Blu-ray 3 – 3 VIDEO2 AUTO
Media Player 4 OPT2 – COMP2 AUTO
Game 5 – 4 VIDEO3 AUTO
AUX 6 – – – HDMI
8K 7(8K) – – – HDMI
TV Audio – OPT1 – – DIGITAL
CD – – 5 – ANALOG
Contents Connections Playback Settings Tips Appendix
200
Front panel Display Rear panel Remote Index
To Next Page
Loading...
Need help?
General
