[6-channel heigh speakes]
This setting connects Speakers such as the Top Middle and Top Surround/Center Height using the Surround Back terminal.
This can be set when the “Assign Mode” setting is “11.1ch” and the “Floor” setting is “5ch”.
Settings AUDIO OUT connectors
Height Sp Dolby Sp NOTE Front Layout Middle Layout Rear Layout HEIGHT 1 HEIGHT 2
SURROUND
BACK
6ch None
Front Height Top Middle Rear Height Front Height Rear Height Top Middle
z3
Front Height Surround Height Rear Height Front Height Rear Height Surround Height
Top Front Top Middle Top Rear Top Front Top Rear Top Middle
Front Height &
Center Height
Top Surround Rear Height Front Height Rear Height
L: Top Surround
R: Center Height
Front Height &
Center Height
Surround Height
& Top Surround
None Front Height Surround Height
L: Top Surround
R: Center Height
4ch 2ch
Front Height Surround Dolby Rear Height Front Height Rear Height Surround Dolby
Top Front Surround Dolby Top Rear Top Front Top Rear Surround Dolby
2ch 4ch
Front Dolby Surround Dolby Rear Height Front Dolby Rear Height Surround Dolby
z1
This can be selected when using Surround Back speakers.
z2
For the best Auro-3D experience Surround Height speakers are recommended, however you may substitute Rear Height speakers from a Dolby Atmos speaker setup
in place of Surround Height speakers.
z3
Use 2 sets of Height speakers in the appropriate sound modes for Dolby Atmos, DTS:X or Auro-3D playback.
Use the Front Height and Rear Height speakers for Dolby Atmos playback.
Use the Front Height, Surround Height and Rear Height speakers for DTS:X playback.
Use the Front Height and Surround Height speakers for Auro-3D playback.
Contents
Connections Playback Settings Tips Appendix
211
Front panel Display Rear panel Remote Index
To Next Page
Loading...
Need help?
General
