Denon AVR-X3800H User Manual

o
Bi-Amp
When “Assign Mode” is “7.1ch (Bi-Amp)” and “5.1ch (Bi-Amp) +
ZONE2”, the speaker terminal used for the bi-amp connection of front
speaker is displayed. Depending on the settings of “Assign Mode”, the
connector is determined automatically.
HEIGHT 1:
The HEIGHT 1 speaker terminal is used
for the bi-amp connection of the front
speakers.
HEIGHT 2:
The HEIGHT 2 speaker terminal is used
for the bi-amp connection of the front
speakers.
o
Front B
When “Assign Mode” is “7.1ch + Front B”, the speaker terminal used
for the second front speakers is displayed.
HEIGHT 2:
The HEIGHT 2 speaker terminal is used
for the second front speakers.
o
ZONE2
When “Assign Mode” is “7.1ch + ZONE2” and “5.1ch (Bi-Amp) +
ZONE2”, the speaker terminal used for the second front speakers is
displayed.
HEIGHT 2:
The HEIGHT 2 speaker terminal is used
for the ZONE2 speakers.
Contents Connections Playback Settings Tips Appendix
212
Front panel Display Rear panel Remote Index

Denon AVR-X3800H Specifications

General

Channels	9.4
HDMI Outputs	3
Dolby Atmos	Yes
DTS:X	Yes
Wi-Fi	Yes
Bluetooth	Yes
HEOS Multi-room	Yes
Voice Control	Yes (Amazon Alexa, Google Assistant, Apple Siri)
eARC	Yes
Input Sensitivity/Impedance	200 mV / 47 kohms
Ethernet	Yes
Phono Input	Yes
AM/FM Tuner	Yes
Audyssey Room Correction	Audyssey MultEQ XT32
HDR Compatibility	HDR10+, Dolby Vision, HLG
Streaming	Spotify, Tidal
Frequency Response	10 Hz - 100 kHz (+1, -3 dB)
USB Port	Yes
Signal-to-Noise Ratio	100 dB (IHF-A weighted, Direct mode)