Front Speaker
Set the front speaker A/B to use for every sound mode.
A
(Default):
Front speaker A is used.
B : Front speaker B is used.
A+B : Both front speakers A and B are used.
0
This can be set when “Assign Mode” is set to “7.1ch + Front B”. (v p. 223)
2ch Playback
Select the method for setting the speakers used in the 2-channel direct
and stereo playback modes.
o
Setting
Select the method for setting the speakers used in the 2-channel direct
and stereo playback modes.
Auto
(Default):
The settings in “Speakers” are applied.
(v p. 210)
Manual:
Set the speakers for 2-channel playback.
Make the following settings:
o
Front
Set the size of the front speakers for 2-channel playback.
Large
(Default):
Use a large speaker that can adequately
play back very low bass frequencies.
Small:
Use a small speaker that has inadequate
playback capacity for very low bass
frequencies.
0
When “Speaker Config.” - “Subwoofer” in the menu is set to “None”, “Large” is
automatically set. (v
p. 229)
Contents Connections Playback Settings Tips Appendix
238
Front panel Display Rear panel Remote Index
To Next Page
Loading...
Need help?
General
Weight and Dimensions
