Denon AVR-X4500H User Manual

Registering preset codes
There are two methods for registering preset codes; the simple method for
registering preset codes of Denon players, and the method for registering
the preset numbers of other manufacturers’ devices.
0
“Registering Denon players” (v p. 265)
0
“Registering by entering preset numbers” (v p. 266)
o
Registering Denon players
Use the following simple method to register the preset codes of Denon
Blu-ray Disc players, DVD players and CD players.
n
Registering Blu-ray Disc players
1
Press and hold down Blu-ray and OPTION until the
DEV., TV and AVR indicators on the remote are flashing
green, then release.
n
Registering DVD players
1
Press and hold down DVD and OPTION until the DEV.,
TV and AVR indicators on the remote are flashing
green, then release.
n
Registering CD players
1
Press and hold down CD and OPTION until the DEV., TV
and AVR indicators on the remote are flashing green,
then release.
Contents Connections Playback Settings Tips Appendix
265
Front panel Display Rear panel Remote Index

Denon AVR-X4500H Specifications

General

Display	-
Quantity	1
HDCP version	2.2
Apple docking	No
Product color	Silver
Audio decoders	DTS:X, Dolby Atmos, Dolby Surround, Dolby TrueHD
Volume control	Rotary
Audio amplifier	Yes
Multi-Zone quantity	3
Connector contacts plating	Gold
Receiver type	Surround
Frequency range	10 - 100000 Hz
Audio output channels	9.2 channels
Signal-to-Noise Ratio (SNR)	100 dB
Power output per channel (20-20KHz@8 Ohm)	125 W
FM band range	87.5 - 108 MHz
Supported radio bands	AM, FM
Internet radio services supported	Amazon Music, Deezer, Napster, Pandora, SIRIUS Internet Radio, Spotify, Tidal, TuneIn, iHeartRadio
HDMI in	8
Audio (L/R) in	5
Composite video in	4
Component video (YPbPr/YCbCr) in	2
Connectivity technology	Wired
AC input voltage	230 V
AC input frequency	50 Hz
Power consumption (standby)	0.1 W
Power consumption (typical)	710 W

Weight and Dimensions

Depth	389 mm
Width	434 mm
Height	167 mm
Weight	13500 g