To Next Page

To Previous Page

Connecting a playback device

This unit is equipped with three types of video input connectors (HDMI, component video and composite video) and three types of audio input connectors

(HDMI, digital audio and audio).

Select input connectors on this unit according to the connectors equipped on the device you want to connect.

If the device connected to this unit is equipped with an HDMI connector, it is recommended to use HDMI connections.

In the HDMI connection, audio and video signals can be transmitted through a single HDMI cable.

“Connecting a set-top box (Satellite tuner/cable TV)” (v p. 76)

“Connecting a media player” (v p. 77)

“Connecting a Blu-ray Disc player or DVD player” (v p. 78)

“Connecting a game console or player device compatible with 8K” (v p. 79)

“Connecting a turntable” (v p. 80)

Connect devices to this unit as indicated by the input sources printed on the audio/video input connectors of this unit.

The source that is assigned to the HDMI IN, DIGITAL AUDIO IN, COMPONENT VIDEO IN, VIDEO IN and AUDIO IN connectors can be changed. See “Input Assign” on how

to change the input source assigned to the input connectors. (v p. 210)

To play back audio signals that are input to this unit on a TV connected via HDMI, set in the menu “HDMI Audio Out” to “TV”. (v p. 200)

To enjoy content that is copyright protected by HDCP 2.2 or HDCP 2.3, use a playback device and TV compatible with HDCP 2.2 or HDCP 2.3.

Contents Connections Playback Settings Tips Appendix

Front panel Display Rear panel Remote Index