Denon CEOL RCD-N12

3
NOTE
• The TV connection is used to pass audio to the CEOL from your
TV's built-in sources (tuner, smart TV apps, etc.) and HDMI devices
connected to your TV. The CEOL does not generate any video output.
• Make sure the audio output section in your TV settings menu is set
to output only 2ch PCM audio. Dolby Digital and DTS audio are not
supported.
HDMI
IN
(ARC)
2
Connect TV audio (optional)
1
Connect one end of the HDMI cable to the TV port
labeled “ARC” or “eARC”.
The CEOL does not support eARC functionality, however
you can still connect it to an eARC port to use ARC
functionality.
2
Connect the other end of the HDMI cable to the HDMI
ARC port on the back of the CEOL.
1.RCD-N12E3_QSG_ENG_230629.indd 31.RCD-N12E3_QSG_ENG_230629.indd 3 2023/07/05 11:45:562023/07/05 11:45:56