17
Playing back files stored on a PC or NAS (Network Attached Storage) with the Cocoon App (Music Server)
Settings for playing back with Windows Media
Player 11
1
Start up Windows Media Player 11 on the PC.
2
Select “Media Sharing” in the “Library”.
3
Click the “Share my media” check box, select
“Cocoon Home”, and then click “Allow”.
4
As you did in step 3, select the icon of the device
(other PCs and mobile devices) you want to use as a
media controller, and then click “Allow”.
5
Click “OK” to nish.
Sharing media stored on the NAS
Change settings on the NAS to allow this unit and other devices (PCs
and mobile devices) used as media controllers to access the NAS. For
details, see the owner’s manual that came with the NAS.
About playback
When you start playback on a PC, NAS, or DMS, the input source
for this unit automatically switches to “Music Server”, and audio is
output from this unit. If the input source does not switch to “Music
Server” automatically, switch the input source to “Internet Radio” or
“iPod” before playback.
The name of the currently played back track and its artist name appear
on the display of this unit.
Use Cocoon App to play back/stop files and perform other operations.
You can also adjust or mute the volume.
Pressing
while this unit is playing back stops the playback on this
unit and switches to “Preset 1”.
•When using a server that supports transcoding such as Windows
Media Player (version 11 or higher), you can play back WMA
Lossless files.
•Depending on the played back file, the track name or artist name
may not be displayed.
NOTE
The music display order depends on the specifications of your PC,
NAS, or DMS.
n Music Server operation buttons
Operation buttons Function
+, – Volume up / down
13
Play the track / Pause the track
Switching the input source
X
Power on/standby
To Next Page
Loading...
