Denon DCD-1420 - Advanced CD Playback Functions; Track Search Functions; Index Search; Programmed Playback

;
i
1
1
1
'
}
1
1
:
ADVANCED CD PLAYBACK
(Number
buttons)
e Use the number buttons and the +10 button to input the number of the
desired track.
For example, to play track number 4, press [4], and to play track number
12, press and [2]. Playback will begin from that track.
2] Advancing to the next track
during playback
Press the Automatic search forward button { PPI) during playback.
e The pickup will advance to the beginning of the next track and playback
will continue. Pressing the button several times will forward the pickup
the corresponding number tracks.
3] Returning to the beginning of the
current track during playback ..............c:ccsseseee
Press the Automatic search reverse button ( 'q ) during playback.
e The pickup will return to the beginning of the current track and playback
will continue. Pressing the button several times will return the pickup
the corresponding number tracks.
@ Finding Sections Within a Track
Sevilid etn ciao ag Ga sae spat abebsca apices bed eis vi onaienesesnastadals Index Search
e With this function, you can find and play from the beginning of sections
within the track marked by index numbers.
(Number buttons)
@ “--” appears on the TRACK NO. display when the INDEX button is
pressed.
@ Input the track number using the number buttons.
Next, ’--” appears on the INDEX display. Input the desired index
number, and playback will start from that index number.
For example, to start from index 2 on track number 3, press INDEX, 3,
then 2.
Indexes
e indexes are numbers which are assigned to sections within a
track. Check the disc’s explanatory notes for the index numbers.
e if you input an index number not on the. disc, playback will start
from the last index number on the track.
5) Playing Specific Tracks in a
Specific Order .............ssecsscsersressssssensessneneeaesenenns Programmed Play
e With this function, you can choose any of the tracks on the disc and
program them to play in any order.
e Programming is possible with the disc holder open.
e Up to 20 tracks can be programmed.
e The programmed tracks are shown on the calendar.
(1) Programming
(Number buttons)
(PROG/ DIRECT)
e Press the PROG/DIRECT button so that the indicator
lights, then use the number buttons and the +10 button to program the
tracks.
For example, to program tracks 3, 12, and 7, press 3),
[410], 2, and 77.
The corresponding track number lights on the calendar each time a
track is programmed, the track number is displayed on the TRACK NO.
display, the number of tracks programmed is displayed on the INDEX
display, and the total playing time of the programmed tracks is
displayed on the TIME display. A few seconds after the last track has
been programmed, the total number of tracks programmed is display-
ed on the TRACK NO. display and the total! playing time of the
programmed tracks is displayed on the TIME display.
(2) Checking the Programmed Tracks
(CALL)
e Press the CALL button. ;
The programmed tracks are displayed in order on the TRACK NO.
display each time the CALL button is pressed.
(3) Playing the Programmed Tracks
e Press the ( » PLAY) button to play the tracks in the programmed order.
(4) Correcting a Programmed Track
(Number buttons)
e
Tocorrect
the
last
track
which
ahs
been
progreuinsd:
press
the
CLEAR
button
then
progam
the
track
correcity.
e
Toclear
a
track
in
the
middele
of
the
program,
press
the
CALL
button
to
recall
the
track,
then
press
CLEAR
button,
and
finally
press
STOP
button.
i
i
‘
'
i
i
t
|
c