Denon DCD-1520AE - User Manual

Other manuals for Denon DCD-1520AE

Getting Started10 pages

Questions and Answers

K
kennethmatthewsAug 10, 2025
What to do if my Denon DCD-1520AE CD Player won't turn on?
- D
  Devin DixonAug 10, 2025
  If your Denon CD Player won't turn on, first check that the power plug is correctly inserted into the power outlet. If it is, the unit might be in standby mode. Press the POWER button on the remote control to turn it on.
N
nicoleandersonAug 20, 2025
Why does my Denon DCD-1520AE CD Player automatically turn off?
- H
  Heather HallAug 20, 2025
  Your Denon CD Player may be automatically turning off because the Auto Standby mode is enabled. When this mode is set to On, the unit will switch to standby mode if it remains stopped with no operations or input signals for approximately 30 minutes.
J
Jacqueline JonesAug 30, 2025
Why is my Denon DCD-1520AE CD Player remote not working?
- C
  christophercervantesAug 30, 2025
  If your Denon CD Player remote isn't working, several factors could be the cause. First, ensure the batteries aren't worn out; if they are, replace them with new ones. Make sure you are within 8 meters of the unit and within a 30° angle. Remove any obstacles that might be blocking the signal between the remote and the CD player. Also, verify the batteries are inserted correctly, matching the polarity marks. Strong light on the remote control sensor can also interfere, so try moving the unit. If you're using a 3D video device, adjust its position to prevent interference. Finally, ensure the remote is in the correct mode by pressing the REMOTE MODE CD button.