To Next PageTo Next PageWhat to do if my Denon DCD-1520AE CD Player won't turn on?
If your Denon CD Player won't turn on, first check that the power plug is correctly inserted into the power outlet. If it is, the unit might be in standby mode. Press the POWER button on the remote control to turn it on.
Why does my Denon DCD-1520AE CD Player automatically turn off?
Your Denon CD Player may be automatically turning off because the Auto Standby mode is enabled. When this mode is set to On, the unit will switch to standby mode if it remains stopped with no operations or input signals for approximately 30 minutes.
Why is my Denon DCD-1520AE CD Player remote not working?
If your Denon CD Player remote isn't working, several factors could be the cause. First, ensure the batteries aren't worn out; if they are, replace them with new ones. Make sure you are within 8 meters of the unit and within a 30° angle. Remove any obstacles that might be blocking the signal between the remote and the CD player. Also, verify the batteries are inserted correctly, matching the polarity marks. Strong light on the remote control sensor can also interfere, so try moving the unit. If you're using a 3D video device, adjust its position to prevent interference. Finally, ensure the remote is in the correct mode by pressing the REMOTE MODE CD button.
General
