2 Display on this unit shows nothing
Symptom Cause / Solution Page
Display is o. •Press DIMMER, and change the setting to anything other than “O”.
•The display turns o when the Pure Direct mode is on.
28
28
2 No sound comes out
Symptom Cause / Solution Page
No sound is produced or sound is
distorted.
•Check the connections for all devices.
•Insert connection cables all the way in.
•Check that input connectors and output connectors are not reversely connected.
•Check cables for damage.
•Check the amplifier’s functions and controls and adjust as necessary.
17,18,19,20
21,22,24,25
–
–
–
–
2 Sound is interrupted or noise occurs
Symptom Cause / Solution Page
During playback from the USB
memory device, sound is occasionally
interrupted.
•When the transfer speed of the USB memory device is slow, sound may occasionally be
interrupted.
–
To Next Page
Loading...
