Switching the display’s brightness
The display brightness can be adjusted between four levels.
1
Press DIMMER.
Switching the Pure Direct mode
When the Pure Direct mode is used, the display turns o and digital output
stops. This reduces the source of noise that can adversely aect sound
quality, enabling high quality playback.
1
Press PURE DIRECT.
The display turned o, and Pure Direct playback begins.
NOTE
•In the Pure Direct mode, DIMMER is not available for operation.
Select the playback media mode
1
Press SOURCE to select the playback media mode.
DISC : Select to playback a disc.
USB : Select to playback an iPod or USB memory device.
USB-DAC / COAXIAL / OPTICAL :
Select to use this unit as a D/A converter.
%
•You can also select the input source by pressing SOURCE on the main unit.
To Next Page
Loading...
