Denon DCD-1520AE - Playing Files Stored on USB Memory Device

40
Appendix
TipsSettingsConnections
Contents
Front panel Display Rear panel IndexRemote
Playback
Playing files stored on USB memory
device
1
Connect the USB memory device to the USB port
(vpage22).
The playback media mode automatically switches to USB, and
playback starts.
2
Press MODE to select the “Folder mode” or “Memory
mode”.
n About the display
•When “Folder mode” is selected
All the files in the selected folder are played.
•When “Memory mode” is selected
After the selected folder and files are played, all the files in all
the folders are played.
3
Use ui to select the folder, then press ENTER.
4
Use ui to select the file, then press ENTER.
Playback starts.
Operation buttons Function
1/
3
Playback / Pause
2
Stop
8 9
Skip to previous track / Skip to next track
6 7
Fast-reverse / Fast-forward
RANDOM Random playback
REPEAT
Repeat playback
•Switching between Single-track repeat
and All-track repeat.
MODE
Switch to Folder playback mode
•Playing back only within the selected
folder.
%
•When a USB memory device is connected to this unit, playback starts automatically
when “USB” input source switching occurs.
•If the unit power is turned on when an iPod is connected to the USB port, iPod
playback starts automatically.
NOTE
•Note that Denon will accept no responsibility whatsoever for any problems arising
with the data on a USB memory device when using this unit in conjunction with
the USB memory device.