Denon DCD-1600NE - Settings: Auto Standby; Setting Auto Standby Mode

Setting the Auto Standby mode
When Auto Standby mode is set to On, if the unit remains in the stopped
state and no operations are performed for approximately 30 minutes, the
unit automatically switches to standby mode.
The default setting is “Off”.
.
POWER
X
Turning Auto Standby mode on
1
Press and hold POWER X on the remote control unit
for more than 5 seconds to turn the Auto Standby
mode on.
The power indicator flashes three times.
Turning Auto Standby mode off
1
Press and hold POWER X on the remote control unit
for more than 5 seconds to turn the Auto Standby
mode off.
The power indicator flashes once.
Contents Connections Playback Settings Tips Appendix
35
Front panel Display Rear panel Remote Index