Denon DCD-600NE - Playing tracks in a specific order (Program playback)

Playing tracks in a specific order
(Program playback)
Up to 25 tracks can be programmed.
1
In the stop mode, press PROGRAM.
“PGM” appears on the display.
2
Use 0 – 9, +10 to select the tracks.
GExampleH
To program tracks 3 and 12 to be played in that order, press 3, +10
and 2 one after the other.
3
Press
1/3.
Playback starts in the programmed order.
0
The program is cleared when the disc tray is opened or the power is turned off.
0
When RANDOM is pressed during program playback, the programmed tracks are
played in random order.
0
When REPEAT is pressed during program playback, the tracks are played
repeatedly in the programmed order.
o
Checking the order of the programmed tracks
In the stop mode, press 9.
The tracks are shown in the programmed order in the display each
time 9 is pressed.
o
To clear the last track programmed
In the stop mode, press CLEAR.
The last track programmed is cleared each time the button is pressed.
0
You can also select a track to be cleared by pressing 9.
o
Clearing the all programmed track
In the stop mode, press PROGRAM.
Contents Connections Playback Settings Tips Appendix
27
Front panel Display Rear panel Remote Index