Denon DCD-600NE - No sound or distorted sound; Sound interruptions or noise

No sound comes out
No sound is produced. Or sound is distorted.
0
Check the connections for all devices. (v p. 17)
0
Insert connection cables all the way in.
0
Check that input connectors and output connectors are not reversely connected.
0
Check cables for damage.
0
Check the amplifier’s functions and controls and adjust as necessary.
0
When Pure Direct mode is set to “PURE DIRECT ON MODE2”, digital audio output stops. Set Pure Direct mode to “PURE DIRECT OFF” or “PURE
DIRECT ON MODE1” to output digital audio. (v p. 24)
Sound is interrupted or noise occurs
During playback from the CD-R/CD-RW, sound is occasionally interrupted.
0
This may be caused by poor recording conditions, or the disc itself may be of poor quality. Use a correctly recorded disc.
Contents Connections Playback Settings Tips Appendix
38
Front panel Display Rear panel Remote Index